Home Page - KDRemoteWeb

The K-D Remote application has lost connection with the
test administrator, and is disconnected.

Please re-establish a Remote Connection with
the test administrator.

A request to control your K-D Remote application has been recieved.
Do you accept a Control Request from:

Accept a Video Call

Accept Audio Recording

Recorded audio will be transferred to the controlling application to be analyzed by the King-Devick ASR engine. Audio recordings are NOT saved.

To allow the app to use your Microphone, when prompted
(by your web browser), choose Allow.

You are now connected with the test administrator:

Step 1

Please provide the code below to the
test administrator.

Remote Connect Code:

The test administrator will take you through the K-D Test.

You can choose to calibrate your screen with either a ruler or 8.5 inch x 11 inch Letter Page

If you change the display or display resolution, the system will need to be recalibrated.

If you change the display or display resolution, the system will need to be recalibrated.

Please position the screen at your normal reading distance.

You can wear corrective lenses if normally used to read.

You will be timed reading a series of numbers aloud as quickly as you can without making any mistakes.

Timing occurs when test cards are displayed. The test will begin timing after tapping the Demonstration Card.

The arrows on the Demonstration Card show the direction to read the numbers on each Test Card.

You should start at the top and read aloud from left to right. You should NOT use your hand or finger to follow the number pattern.

After the Demonstration Card, you should immediately begin reading the numbers aloud on the Test Cards.

After calling out the last digit on each Test Card, tap the screen to proceed to a Break Card where timing is paused.

Please wait while the test administrator records your test results.